High stress of 5°C/min.
This faster temperature (& humidity) chamber enables the application of high stress to the specimen at a rapid temperature change rate of 5°C/min. or more. Due to the larger refrigeration system 5°C/min. or more are achieved from -45°C to +155°C with the SMG and SMS models, and from -18°C to +158°C with the SML and SMU models (without specimen loaded).
Free access both sides of the chamber
The machinery compartment is located in the back of the test area, enabling access to either side.
Easy to set specimens thanks to low floor level
For cases in which specimens are set in the chamber using a hand-lift, an insertion hole is provided at the bottom of the chamber. Further the test area has been lowered as well, so that large-sized specimens and heavy articles can easily be inserted or withdrawn.
Instrumentation integrated into the door
To minimize the required installation space for the device, the instrumentation section has been integrated into the door. The controller unit is integrated on a bright and color LCD interactive touch-screen system which provides easy controlling of the chamber.
in mm (WxHxD)
in mm (excl. projection)
|SML-21||-40 to +180°C||YES||20 to 98%rh||0||1800 lL||1200 x 1000 x 1500||1400 x 1900 x 2737|
|SMU-21||-40 to +180°C||NO||0||0||1800 L||1200 x 1000 x 1500||1400 x 1900 x 2737|
|SMS-21||-70 to +180°C||YES||20 to 98%rh||0||1800 L||1200 x 1000 x 1500||1400 x 1900 x 2737|
|SMG-21||-70 to +180°C||NO||0||0||1800 L||1200 x 1000 x 1500||1400 x 1900 x 2737|
By submitting your request you agree to the processing of your data for the purpose of processing your request.
Data Protection Declaration and Revocation Notices